RPF SI Selection Process 2024 has been released by the board to recruit Sub-Inspectors in the Railway Protection Force (RPF) and Railway Protection Special Force (RPSF). It involves three main steps. In this article we have provided details of each stage.
RPF SI Selection Process 2024 Overview
RPF SI Selection Process 2024 comprises three important stages: Computer-Based Test (CBT), Physical Efficiency and Measurement Tests (PET/PMT), and Document Verification (DV). The process ensures a thorough assessment of candidates’ intellectual, physical, and document authenticity. Below is a table of the key details:
|
Exam Name |
Railway Protection Force Sub Inspector (RPF SI) |
|
Conducting Body |
Railway Recruitment Board (RRB) |
|
Post Name |
Sub-Inspector (SI) |
|
Exam Level |
National |
|
Selection Process |
CBT, PET & PMT, Document Verification |
|
Exam Mode |
Online |
|
Exam Duration |
90 minutes |
RPF SI Selection Process
The RPF SI Selection Process involves three key phases:
- Computer-Based Test (CBT)
- Physical Efficiency Test (PET) and Physical Measurement Test (PMT)
- Document Verification (DV)
Phase 1: RPF SI Computer-Based Test (CBT)
Computer-Based Test (CBT) is the first stage in the selection process. It is a national-level test conducted online to assess candidates’ general knowledge, reasoning, and arithmetic skills.
|
CBT Exam Pattern |
||
|
Section |
No. of Questions |
Marks |
|
General Awareness |
50 |
50 |
|
Arithmetic |
35 |
35 |
|
General Intelligence & Reasoning |
35 |
35 |
|
Total |
120 |
120 |
- Duration: 90 minutes
- Marking Scheme:
- Correct Answer: +1 mark
- Wrong Answer: -⅓ mark
- No marks deducted for unanswered questions.
Phase 2: RPF SI PET and PMT
The Physical Efficiency Test (PET) and Physical Measurement Test (PMT) in the RPF SI Selection Process 2024 are designed to assess the physical fitness and eligibility of candidates for the role of Sub-Inspector in the Railway Protection Force (RPF). This phase ensures that candidates meet the required physical standards essential for the job.
Physical Efficiency Test (PET)
The PET evaluates candidates’ endurance and physical capabilities. The standards differ for male and female candidates and are outlined below:
|
Category |
1600m Run (Male) |
800m Run (Female) |
Long Jump |
High Jump |
|
Sub-Inspector (Male) |
6 minutes 30 seconds |
— |
12 feet |
3 feet 9 inches |
|
Sub-Inspector (Female) |
— |
4 minutes |
9 feet |
3 feet |
Note: No additional chances are provided for running events. Candidates must qualify in all events to proceed to the next stage.
Physical Measurement Test (PMT)
The PMT ensures that candidates meet the prescribed height and chest measurements (for males). Different categories have different requirements:
|
Category |
Height (Male) (cm) |
Height (Female) (cm) |
Chest (Male) (cm) |
|
UR/OBC |
165 |
157 |
80-85 |
|
SC/ST |
160 |
152 |
76.2-81.2 |
|
Garhwalis, Gorkhas, Kumaonese, etc. |
163 |
155 |
80-85 |
Important Points
- Disqualification: Failure to meet the PET or PMT criteria results in disqualification.
- No Relaxation in PET Standards: While there are category-wise relaxations in PMT, PET standards are uniform for all.
- Strict Measurement Standards: PMT is conducted using precise tools, and candidates cannot appeal for re-measurement.
Phase 3: RPF SI Document Verification (DV)
The Document Verification (DV) stage is the final step in the RPF SI Selection Process 2024, conducted for candidates who have successfully cleared the Computer-Based Test (CBT) and Physical Efficiency and Measurement Tests (PET/PMT). This phase verifies the authenticity of the candidates’ credentials and ensures compliance with eligibility criteria.
- Candidates must present their graduation certificates and mark sheets from a recognized university.
- SC/ST/OBC/EWS candidates must produce caste certificates in the prescribed format.
- Candidates must carry original and photocopies of government-issued IDs such as Aadhaar, Voter ID, or Passport.
- Proof of domicile may be required for candidates applying under specific regional categories.
Note: Candidates unable to present valid documents will be disqualified, regardless of performance in previous stages. In case of a tie in marks, older candidates are given priority based on age.
RPF SI Final Merit List
The final merit list for the RPF SI Selection Process 2024 is prepared based on candidates’ performance in the Computer-Based Test (CBT), ensuring they meet the qualifying criteria in the Physical Efficiency Test (PET) and Physical Measurement Test (PMT), and successfully pass the Document Verification (DV) stage. The final appointment is subject to clearing the Medical Fitness Test and completing initial training as mandated by the Railway Administration. Only candidates fulfilling all these criteria are included in the final merit list and considered for recruitment as Sub-Inspectors in the Railway Protection Force (RPF).
|
Related Important Links |
RPF SI Selection Process 2024: FAQs
What is the selection process for RPF SI 2024?
The selection process includes a Computer-Based Test (CBT), Physical Efficiency Test (PET), Physical Measurement Test (PMT), and Document Verification (DV).
What are the physical test details for RPF vacancy 2024?
The physical tests include a 1600m run for males (6 min 30 sec), an 800m run for females (4 min), long jump, and high jump, along with height and chest measurements in the PMT.
What is the running time for SI in RPF?
Male candidates must complete a 1600m run in 6 minutes 30 seconds, and female candidates must complete an 800m run in 4 minutes.
Is there negative marking in RPF exam?
Yes, the RPF SI exam has a negative marking of 1/3rd of the marks for every incorrect answer.
